16-CH POWER SUPPLY PASSIVE RECEIVER HUB

The 16-channel NV-16PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT Phybridge's PVD™ transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load/no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.

• NV-16PS13-PVD Power Supply Passive Video Receiver Hub
• Rack mount "L" brackets for front, rear, or wall installations
• Rubber feet for desk applications
• Sixteen 2ft (60cm) coax jumpers
• Molded IEC power inlet cord 7ft (200cm)

• Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
• Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
• Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
• Automatic-reset fault protection; transient protection
• Frequency Response DC to 10 MHz
• Individually floating outputs ensure total ground-loop immunity
• Diagnostic LEDs show load/no load, miswires, and overload conditions

NVT Transceivers:

• NV-216A-PV
• NV-218A-PVD
• NV-226J-PV

• WEEE
• RoHS