Peerless PLAV60-UNL Articulating Arm with Vertical Adjustment

The PLA60 offers a single solution for displays up to 95" in a wide range of installations including lobbies, hotel rooms, boardrooms, public displays or home theaters. Its all-steel construction enables it to hold screens up to 175lb, while its self-lubricating bushings enable the arms to smoothly articulate and position your display for optimal viewing. Combined with adjustable tilt and pivot capabilities, the PLA60 is the only wall arm you need.

• PLAV60-UNL Articulating Arm with Vertical Adjustment
• 1 x Wall plate
• 1 x Tilt-roll assembly
• 1 x Arm assembly
• 1 x Wall support arm axle
• 3 x Vinyl trim
• 8 x Screw bolt (M10 x 1.5 x 15 mm )
• 1 x Nylon washer (.505 x .75 x .062")
• 1 x Tilt adjustment knob
• 1 x Carriage bolt (3/8"-16 x 3.25")
• 2 x Delrin washer (1.525 x 2 x .062" )
• 1 x Socket cap screw (#8-32 x .375")
• 8 x Plastic finishing cap
• 1 x Holding pin
• 1 x Retainer plug
• 8 x Wood screw (5/16 x 3")
• 8 x Washer (.250 x 1 x .068" )
• 1 x Allen wrench (9/64")
• 4 x Cable management clips
• 4 x Cable tie
• 1 x Polyester mesh sleeve (36")
• 1 x Allen wrench (6 mm)
• 1 x Allen wrench (10 mm)
• 1 x Adapter bracket
• 2 x Shallow adapter bracket
• 2 x Deep adapter bracket
• 1 x Allen wrench
• Security Adapter Bracket Fasteners:
• 4 x (M6 x 20 mm)
• 4 x (M6 x 30 mm)
• 6 x Multi-washer
• 6 x (M8 x 16 mm)
• 4 x (M8 x 40 mm)
• 6 x (M4 x 12 mm)
• 4 x (M4 x 25 mm)
• 4 x (M5 x 12 mm)
• 4 x (M6 x 12 mm)
• 4 x (M6 x 25 mm)
• 4 x (I.D. 5.6 mm)
• 4 x (M8 x 25 mm)
• 4 x (I.D. 8.7 mm)

• Pivot: up to 180 degree
• Roll: +/-7 degree to level screen horizontally at any position
• +/-1" vertical adjustment located within reach behind screen
• Extends out to 31.8" , retracts to 5.1"
• Mounts to two wood studs or concrete
• Universal models adapt to screens with up to 28.7" wide x 17" high mounting inserts

Plasma and LCD Flat Panel Screens: 37" - 60"

UL