We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Omnitron Systems Managed Serial RS-232 to Fiber Media Converter
by
OMNITRON SYSTEMS
PCN#
8PY873
MFG#
8766-0W
Estimated Shipment:
Calculating Shipping
Product Highlights:
- 1 x LC Ports
- DuplexLC Port
- Multi
Show more
Omnitron Systems Managed Serial RS-232 to Fiber Media Converter
Tech Specs
Specifications
Manufacturer | Omnitron Systems |
Manufacturer Part Number | 8766-0W |
Manufacturer Website Address | http://www.omnitron-systems.com |
Brand Name | Omnitron Systems |
Product Line | iConverter |
Product Model | 8766-0 |
Product Name | Managed Serial RS-232 to Fiber Media Converter |
Marketing Information | The iConverter RS232 is a managed serial RS-232 to fiber converter that transmits serial protocol over fiber media. The RS232 media converters operate in pairs, extending serial distances over fiber up to 120km, which improves noise immunity from electrical and magnetic interference. The RS232 is available with a single-mode dual fiber, multimode dual fiber or single-mode single-fiber transceiver. The serial port interface is available with either a DB-9 female connector or terminal block connector for field wiring. The RS232 automatically detects the signal data rate of the connected serial device, ranging from 110 bps to 921,600 bps. It also automatically adjusts to changes in the connected device's data rate during operation without reconfiguration or interruption of service. Connection to DTE or DCE devices are configured by an easily accessible DIP-switch on the front-panel of the module. This feature eliminates the need to use a null-modem cable when connecting two serial devices of the same type. A built-in Fiber Loopback DIP-switch provides easy validation of the entire fiber segment without interrupting fiber operations. iConverter RS232 modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC or DC powered chassis. The iConverter Multi-Service Platform consists of Network Interface Devices, T1/E1 multiplexers, CWDM multiplexers and managed media converters that combine to deliver Carrier Ethernet and TDM services over fiber or CWDM wavelengths. This flexible architecture supports a wide variety of configurations for scalable and reliable fiber connectivity in Service Provider and Enterprise networks. |
Product Type | Transceiver/Media Converter |
Interfaces/Ports
Total Number of Ports | 2 |
Number of LC Ports | 1 |
LC Port Type | Duplex |
Media & Performance
Media Type Supported | Optical Fiber |
Fiber Mode Supported | Multi-mode |
Fiber Optic Wavelength | 1310 nm |
Maximum Distance Supported | 3.11 Mile |
Fiber Optic Cable Standard |
|
Power Description
Power Source | DC |
Physical Characteristics
Height | 2.8" |
Width | 0.9" |
Depth | 4.5" |
Weight (Approximate) | 8 oz |
Miscellaneous
Environmentally Friendly | Yes |
Environmental Certification |
|
Country of Origin | United States |
Warranty
Limited Warranty | Lifetime |