MONOPRICE FLEXBOOT FLAT CAT6 ETHERNET PA

Imation textured backcoating safeguards your data by repelling error causing static electricity. Imation backcoating also acts like a cushion to absorb wound-in debris safely to decrease the chance of data loss and minimizes inter-layer slippage for uniform signal output.

• Leader Block Loading/Unloading: Minimum of 5000 load/unloads
• Cartridge Drop: Test Suitable for single use after drop of up to 39.4 inches (1m)
• Wet bulb maximum (Operating Conditions): 78°F (26°C)
• Wet bulb maximum (Storage Conditions): 80°F (27°C)
• Permanent Errors: Zero
• Transportation Conditions (10 days maximum): -10°F to 120°F (-23°C to 49°C) 5% RH to 80% RH 80°F (27°C) wet bulb maximum with no condensation
• Intrinsic Coercivity (Hc) with time constant of 0.3 seconds: 1625 Oersteds (129.3 kA/m) +- 75 Oe using VSM

Thickness:

• Substrate: 0.25 mils nominal (6.3 microns)
• Total: 0.35 mils nominal (8.9 microns)

Durability:

• Long Length: Test mode of 400 full Test mode of 400 full file read-while-write passes
• Short Length: Test mode of 120000+ read-forward passes

Error Characteristics:

• Signal Track: Less than one dropout for each 5 x 10^7 bits
• Multi-Track/Coincident: No more than 10