We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Gefen 4K Ultra HD HDBaseT Receiver w/ Audio De-Embedder and POH
by
GEFEN INC
PCN#
3281AN
MFG#
EXT-UHDA-HBTL-RX
Estimated Shipment:
Calculating Shipping
Product Highlights:
- 1 Output Device
- 230 ft Range
- 1 x Network (RJ
Show more
Gefen 4K Ultra HD HDBaseT Receiver w/ Audio De-Embedder and POH
Tech Specs
Specifications
Manufacturer | Gefen, Inc |
Manufacturer Part Number | EXT-UHDA-HBTL-RX |
Manufacturer Website Address | http://www.gefen.com |
Brand Name | Gefen |
Product Model | EXT-UHDA-HBTL-RX |
Product Name | 4K Ultra HD HDBaseT Receiver w/ Audio De-Embedder and POH |
Marketing Information | Extend HDMI with audio breakout up to 70 meters/230 feet, over a single CAT-5 The Gefen EXT-UHDA-HBTL-RX is a high-performance HDBaseT™ Receiver that can extend HDMI up to 70 meters (230 feet) at 1080p and 40 meters (130 feet) at 4K, over a single CAT-5e cable. It also de-embeds analog L/R, TOSLINK® optical digital, and coaxial digital audio from the video for use with a separate audio system, enhancing the impact of presentations. This Receiver uses Gefen's implementation of the HDBaseT™ technology with enhanced functionality. It accommodates 10.2 Gbps of data throughput and 300 MHz TMDS Clock frequency, and supports HDMI 2.0 resolutions up to 4K Cinema-DCI (4096 x 2160 to 30 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 to 60 Hz, 4:2:0, or 30 Hz 4:4:4), with HDCP 2.2 or 1.4. Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats, such as Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ are passed through to the HDMI output. The EXT-UHDA-HBTL-RX also extends RS-232 and 2-way IR when used with a compatible Sender unit, facilitating the control of A/V sources placed near the Sender from the viewing location, and sending commands from the head end to control the display or another device placed near the Receiver unit. It can also send RS-232 commands from a third-party controller placed by the Receiver, for switching, scaler controls, and EDID management of a compatible Sender unit. Bi-Directional HDBaseT™ standard POH (Power Over HDBaseT™) technology can supply power remotely from the Receiver unit to a compatible Sender unit, or it can pass power from a compatible Sender unit to the Receiver, using the same CAT-5 cable that extends the HDMI signal. Only one of the two units will need a power supply. This feature simplifies installation in cases when an electrical outlet may not be available near the source or the display. The Receiver's small, ultra-low-profile enclosure can be securely surface-mounted and conveniently hidden away from sight behind the display. It also accommodates a Gefen locking power supply plug for secure connection. |
Product Type | Video Extender Receiver |
Technical Information
Connectivity Technology | Wired |
Number of Output Devices Supported | 1 |
Maximum Operating Distance | 230 ft |
Video
Graphics Modes | 4K |
Maximum Video Resolution | 3840 x 2160 |
Interfaces/Ports
Network (RJ-45) | Yes |
HDMI Out | Yes |
Serial Port | Yes |
Number of Network (RJ-45) Ports | 1 |
Number of HDMI Outputs | 1 |
Media & Performance
Media Type Supported | Twisted Pair |
Twisted Pair Cable Standard | Category 5 |
Physical Characteristics
Receiver Height | 0.65" |
Receiver Width | 6" |
Receiver Depth | 4" |
Receiver Weight (Approximate) | 9.60 oz |
Miscellaneous
Package Contents |
|
Warranty
Limited Warranty | 3 Year |