SINGLE MONITOR SPRING ARM RED USB PORTS

CTA Digital's Single Monitor Gas Spring Monitor Arm with USB Ports lives at the crossroads of style and function. This sturdy, versatile mount features a gorgeous red metal finish for just the right pop of color. A spring-loaded center joint locks to the perfect angle when tightened with the included Allen key, and swivels a full 360-degrees. To lock, press the magnetic joint cover, pop it out, tighten the joint, then replace cover. The head of this sturdy unit attaches via standard VESA 75 x 75 or 100 x 100 mm plate to curved or flat monitors up to 35 inches and 24 lbs. It slides out of a locking bracket, for simple mounting. The head tilts a full 180-degrees up and down as well as left to right, and locks in place with an Allen key. The head also rotates for use in either portrait or landscape orientation. The base swivels to create the ideal viewing angle. The mount attaches in two ways. It grips counters that have a thickness range of 0.39 to 3.35 inches via padded rotary C-clamp. It can also be permanently screwed into surfaces through pre-drilled grommets with a hole diameter of 0.39 to 2.3 inches. The base comes with 2 USB ports, ideal for both charging and use with additional devices. Store Allen keys in holes at the rear of the C-clamp mount. All cables can be managed via useful clips down the spring arms.

• 360-degree swivel flexible arm rotation
• VESA joint allows for portrait to landscape orientation and has 180 degree vertical or horizontal flexibility.
• (2) USB ports with wires at rear at the base of the mount for ultra-portable device charging
• Locking/Unlocking gas spring arm versatility for optimal preferred height adjustments
• Magnetic joint covers for a clean and seamless aesthetic

• C-Clamp offers a tool bar to store included integral Allen key tools to make joint adjustments when needed
• Cable management with detachable clips throughout the arm for a clean and amalgamated setup
• Available with C-Clamp or Grommet style mounting
• Compatible 75 x 75 mm or 100×100 mm VESA mount plate. Compatible with screens up to 35" max and CTA's Paragon enclosures.
• Comes with 2 options of VESA plates, one security and one non-security, depending upon mounting environment you can choose which one you need!

• Monitor
• Curved Screen Display
• Flat Panel Display

• Gas Spring
• USB Port
• Sturdy
• Spring Loaded Mechanism
• Lockable
• 360° Swivel
• 180° Tilt
• Rotate
• Landscape/Portrait Mounting
• Spring Arm
• Flexible
• Magnetic
• Adjustable Joint
• Adjustable Angle
• Cable Management

• Red
• Metal

• 75 x 75
• 100 x 100

• 1 x C-Clamp
• 1 x Grommet Clamp
• 1 x Gas Spring Monitor Arm
• 2 x VESA Plate
• 1 x Set of Hardware

• Counter
• Surface