ComNet FDC80 Series 8-Channel Supervised Contact Closure

COMNET

PCN#

YN5091

MFG#

FDC80NLTS1

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Estimated Shipment:

Product Highlights: No Description Found

Product Condition: New and Factory Fresh

Limited WarrantyLifetime

Shipping Weight: 1 lbs.

ComNet FDC80 Series 8-Channel Supervised Contact Closure

Overview

Tech Specs

Specifications

Manufacturer	ACRE
Manufacturer Part Number	FDC80NLTS1
Manufacturer Website Address	http://www.acre-co.com
Brand Name	ComNet
Product Series	FDC80
Product Name	FDC80 Series 8-Channel Supervised Contact Closure
Marketing Information	The ComNet™ FDC80 Series contact closure transmitter and receiver units provide transmission of up to eight independent supervised or unsupervised dry switch or relay contact closures over a single optical fiber, or any two-wire RS-485 copper circuit. Microprocessor-based logic transmits the contact closure information in packets that are ordered and encoded, ensuring extremely robust and reliable transmission. Packets that are garbled, or packets out of sequence with transmission bit errors will not cause random changes of state in the FDC80R receiver unit relays. The supervising function in the FDC80T transmitter allows for the detection of short and open circuit conditions, and normally open or normally closed contact inputs are supported. System faults are displayed via LED status indicators, and user-programmable summary fault alarm contacts are triggered in the FDC80R receiver unit. The FDC80R receiver is offered in both latching and non-latching relay configurations. External series and shunt resistors are included for each of the 8 contact input channels, for contact supervision. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-Rail mounted by the addition of model DINBKT1 adaptor plate. Fully compliant with the requirements of NEMA TS-1/TS-2, these industrially-hardened units are designed for use in virtually any out-of-plant environment.
Product Type	Channel Transmitter

Physical Characteristics

Form Factor	Wall Mountable Rack-mountable
Height	1.1"
Width	5.3"
Depth	6.1"

Miscellaneous

Package Contents	FDC80 Series 8-Channel Supervised Contact Closure Power Supply
Additional Information	Tested and certified by an independent laboratory for full compliance with the environmental requirements and the Caltrans Specification for Traffic Signal Control Equipment Automatic resettable solid-state current limiters Hot-swappable rack modules Interchangeable between stand-alone or rack mount use - ComFit Input/Output Channels 8 Input Contacts Normally open or normally closed Output Contact Rating 30 VDC, 1A, resistive load only, normally open Response Time 25 msec, typ. 35 msec, max Summary Fault Alarm 1 (RX Only), dry relay contacts, Form C, 30 VDC non-latching Contact Input Screw Terminals Contact Output Screw Terminals Power Screw Terminals Summary Fault Alarm Screw Terminals Operating Voltage Range 8 to 15 VDC (or from C1 Rack, sold separately) Power Consumption 3 W Max Circuit Board Meets IPC Standard MTBF >100,000 hours Operating Temp -40 ? C to +75 ? C Storage Temp -40 ? C to +85 ? C Relative Humidity 0% to 95% (non-condensing)
Application/Usage	Fire Alarm Gate Control Environmental Control System Intrusion Detection System
Certifications & Standards	FCC CE C-UL-US NEMA TS-1/TS-2 IPC
Environmentally Friendly	Yes
Environmental Certification	RoHS WEEE
Country of Origin	United States

Warranty

Limited Warranty

Lifetime

Reviews