Altronix StrikeIt1 Panic Device Power Controller

ALTRONIX

PCN#

8Q2474

MFG#

STRIKEIT1

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Estimated Shipment:

Product Highlights:

for Lock, Relay, Door, Switch

Product Condition: New and Factory Fresh

Limited WarrantyLifetime

Shipping Weight: 8 lbs.

Altronix StrikeIt1 Panic Device Power Controller

Overview

Tech Specs

Specifications

Manufacturer	Altronix Corporation
Manufacturer Part Number	STRIKEIT1
Manufacturer Website Address	http://www.altronix.com
Brand Name	Altronix
Product Model	StrikeIt1
Product Name	StrikeIt1 Panic Device Power Controller
Marketing Information	StrikeIt1 will operate up to two (2) 24VDC panic hardware devices simultaneously. It is designed to handle the high current surge panic hardware locking devices demand. Each lock output has an adjustable relock delay timer. It will control a pair of doors simultaneously or independently control two individual doors. It has a follower relay for each output to trigger external relays, ADA push plate switches, etc. Delayed follower relays control automatic door operators for doors that are always locked or for doors that are unlocked during the business day. In addition, two un-switched auxiliary voltage outputs are provided for powering card readers, keypads, REX PIRs, electronic timers, relays, etc. A configurable FACP interface will either provide power or remove power to the lock outputs when activated. LED status indicators are provided to monitor AC power, FACP status and for lock output wiring supervision. Intelligent logic provides protection against accidental shorting of lock outputs.
Product Type	Panic Device Power Controller

Physical Characteristics

Height	13.5"
Width	13"
Depth	3.3"

Miscellaneous

Additional Information	Agency Listings UL Listed for Access Control Systems (UL294), CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment. File# BP6714. CSFM - California State Fire Marshal Approved. File# 3774-1335:114. MEA - NYC Department of Buildings Approved. Features/Specifications Two (2) 24VDC individually or simultaneously controlled lock outputs rated @ 15 amp for 300ms. One (1) 12VDC filtered regulated auxiliary output rated @ .75 amp continuous supply current.(Not affected by FACP trigger) One (1) 24VDC filtered regulated auxiliary output rated @ .75 amp continuous supply current.(Not affected by FACP trigger) Two (2) delayed follower form "C" relay outputs rated @ 0.6 amp/28VDC. Delay time is selectable .5 seconds or 1 second. Energized duration is 1 second. Two (2) follower form "C" relay outputs rated @ 0.6 amp/28VDC. Relays energize while input is closed. Input 115VAC 50/60Hz, 6.3 amp. Two (2) N/O Trigger Inputs. Built-in charger for sealed lead acid or gel type batteries. Automatic switch over to stand-by battery when AC fails. Maximum charge current .3 amp. Green LED indicates input 115VAC present. Green LED indicates panic device status (short, open or triggered). Red LED indicates when FACP disconnect is triggered. Fire Alarm Disconnect: Normally Closed FACP trigger input. Programmable Fire Alarm Disconnect options: a) Removes power to outputs and disables delayed follower relays. b) Connects power to lock outputs and enables delayed follower relays. LK1 and LK2 adjust the panic device release time for the lock outputs from 300ms to 30 sec. Lifetime Warranty. Enclosure Accommodates up to two (2) 12VDC/7AH batteries. Dimensions: 13.5"H x 13"W x 3.25"D. 1/2" and 3/4" combination knockouts.
Application/Usage	Lock Relay Door Switch
Environmentally Friendly	Yes
Environmental Certification	RoHS
Country of Origin	United States
NDAA Compliant	Yes

Warranty

Limited Warranty

Lifetime

Reviews